FANDOM


Welcome to the QnA WikiEdit

CCNA questions and answers

Describe your topicEdit

Write a description about your topic. Let your readers know what your topic is about and add some general information about it.

Latest activityEdit

  • edit Erouting pratice CCNA-2
    edited by A FANDOM user diff
    Edited the section: Issue a clock rate 2000000 interface command on S0/0/1 of router ISP-B.Change the default OSPF reference bandwidth on router A. Configure two static routes with administrative distances of 10.Use the bandwidth command to change the default bandwidth on the link to router B.9 Which router component is used to store the routing table?FlashNVRAMROMSDRAM10 A network is configured with the IP, IPX, and AppleTalk protocols. Which routing protocol is recommended for this network?RIPv1RIPv2EIGRPOSPF11 Refer to the exhibit. What needs to be done to allow these two routers to connect successfully?
    Summary: /* Issue a clock rate 2000000 interface command on S0/0/1 of router ISP-B.Change the default OSPF reference bandwidth on router A. Configure two static routes with administrative distances of 10.Use the bandwidth command to change the default band...
  • edit Erouting pratice CCNA-2
    edited by A FANDOM user diff
    Summary: /* Issue a clock rate 2000000 interface command on S0/0/1 of router ISP-B.Change the default OSPF reference bandwidth on router A. Configure two static routes with administrative distances of 10.Use the bandwidth command to change the default band...
  • edit Erouting pratice CCNA-2
    edited by A FANDOM user diff
    Summary: /* R1(config-router)# network 172.16.0.0 0.0.0.255 area 0R1(config-router)# network 172.16.0.0 0.0.3.255 area 0R1(config-router)# network 172.16.0.0 0.0.15.255 area 0R1(config-router)# network 172.16.0.0 0.0.31.255 area 046 Refer to the exhibit. T...
  • edit Erouting pratice CCNA-2
    edited by A FANDOM user diff
    Summary: /* R1 learned Path A to network 10.2.0.0/16 from a static route and Path B to network 10.2.0.0/16 from EIGRP. Which route will R1 install in its routing table?Both routes are installed and load balancing occurs across both paths.The route via Path B
  • edit Erouting pratice CCNA-2
    edited by A FANDOM user diff
    Summary: /* RIPv1 does not support discontiguous networks.RIPv1 does not support load balancing.RIPv1 does not support automatic summarization.25 Refer to the exhibit. Which solution provides the most efficient use of router resources for forwarding traffic b
  • edit Erouting pratice CCNA-2
    edited by A FANDOM user diff
    Summary: /* New routing updates are ignored until the network has converged.Failed routes are advertised with a metric of infinity.A route is marked as unavailable when its Time to Live is exceeded.The unreachable route is cleared from the routing table after
  • edit Erouting pratice CCNA-2
    edited by A FANDOM user diff
    Summary: /* B(config)# router ripB(config-router)# network 192.168.25.48B(config-router)# network 192.168.25.64A(config)# router ripA(config-router)# no network 192.168.25.32B(config)# router ripB(config-router)# passive-interface S0/0A(config)# no router rip
  • edit Erouting pratice CCNA-2
    edited by A FANDOM user diff
    Summary: /* The packets will travel via R2-R1. The packets will travel via R2-R3.The traffic will be load-balanced between two paths — via R2-R1 and via R2-R3.The packets will travel via R2-R3, and the other path via R2-R1 will be retained as the backup pat
  • edit Erouting pratice CCNA-2
    edited by A FANDOM user diff
    Summary: /* It is used to confirm the receipt of LSUs.It is used to establish and maintain adjacency with other OSPF routers.' It is used by the receiving routers to request more information about any entry in the DBD.It is used to check the database synchron
  • edit Erouting pratice CCNA-2
    edited by A FANDOM user diff
    Summary: /* Issue a clock rate 2000000 interface command on S0/0/1 of router ISP-B.Change the default OSPF reference bandwidth on router A. Configure two static routes with administrative distances of 10.Use the bandwidth command to change the default bandwid

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.